Here's how to turn on the Canon PowerShot S2 IS Bridge camera. Located the button on the top of the camera that has "On" written around the top with arrows on each side, and "Off" written in the middle. See the picture for reference. Then, look at the back of that button, which is turnable right and left. You will see a little pin-like button protruding out. All you have to do is push that pin-like button in with your thumb, hold some pressure on it [keep it pressed in] and turn to the right. The camera will then spring into life and the lens will pop out. If you do the same action but turn left instead, you will enter into picture / video viewing mode and you can look through the pictures and video you have already captured. See the picture below that shows an arrow pointing to the pin-like button that needs to be pressed to turn the camera either on or into file view mode.
Summary:
1. Push in the little pin-like button shown in the picture
2. Keep it pressed in with your thumb and turn / push the surrounding circular button to the right.
3. Snap away
Comments